Turners Fabrications



	The HAZ - BIN range of drum stores provides an economical and safe storage environment for the storage of large quantities of drums. With a combination of 1 or 2 storage levels combined with single or double pallet widths we can offer stores with the capacity to hold between 8 and 64 drums. There are models available for the storage of 25 ltr. and 5 ltr. containers and IBC’s. All models have large capacity sumps with a minimum of 110% of the largest container or 25% of the total liquid stored, whichever is the greater. Designed to meet both the demands of modern industry and its requirements to comply with all current and foreseeable regulations.



		Frame manufactured from 60mm x 60mm x 3mm rolled hollow section, cladding manufactured from 2mm mild steel plate corrugated for additional strength.

		Liquid tight sump designed to contain leaking containments or accidental spillages with drain point 1" bsp.

		Removable galvanised grid flooring.

		Roof fully enclosed with crane lifting points.

		Front access via two sliding doors on easy glide track fitted with shoot bolts and provision for a padlock (not supplied).

		Rear and sides are fully enclosed.

		All seams fully welded to BS4871.

		Ventilation - high and low level vents fitted with flame arrester gauze.

		Three storage levels each accepting 25 and 5 litre containers.

		Fitted with fork lift points.

		Full width base plinths, eliminating ground contact.

		Can be relocated by fork truck or crane.

		Finished with chemical corrosion resistant paint - please specify colour when ordering.